The valve is widely used in petrochemical, oil, metallurgical and thermal power plants and other pressure pipelines, for high and medium pressure pipe even more obvious advantages. The structural design of the valve completely eliminates the pipeline medium pressure on the work of the valve so that the opening and closing pieces of media pressure is always in a self-balanced posture. The main features of the valve are as follows: 1. The operating torque of the product is only 1/10 of the traditional stop valve, without opening the valve can easily open and close the valve, not only the sealing surface of the valve is not easy to wear, and will not cause the valve Flange gasket and connecting pieces of the plastic deformation, greatly reducing the leakage, extending the service life of the flange in the flange seal, but also saves a lot of valve actuators, reducing the cost of the valve. 2. For the same specifications \ different nominal pressure of the valve, the hand wheel \ stem and packing ring and other parts of the size can be interchangeable, which not only saves material, but also for the product of serial production has created favorable conditions. The valve changes the current domestic production of only DN ≤ 100mm high pressure globe valve situation, to meet the industrial production, especially in thermal power plants, oil fields and other aspects of the larger diameter high-pressure globe valve needs. The main technical indicators of the valve are as follows: Nominal diameter DN50 & # 732; 400mm, nominal pressure PN2.5 & # 732; 32.0Mpa; Suitable media for water, steam, oil and other corrosive media; Suitable temperature ≤ 450 ℃; Operating torque (DN100mm, PN16.0Mpa as an example) 120Nm9 traditional products is 120Nm.

Small Injection Machine

1. Vertical opening and closing mold and in-line screw injection for easy inlav and injection molding.


2. Small and exquisite, small footprint, suitable for most plant height.


Equipped with a light-adjustable upper template to facilitate mold installation and replacement;

3. Top-mounted pre-plasticized motor, high-precision transmission and reduced machine height, saving a lot of space in the factory;

4. Vertical hydraulic mold closing structure, fast and low power consumption during mold closing;

5. High-quality nitrided alloy steel pipe set, high wear-resisting and anti-reverse structure, long service life of screw;

6. The temperature control system adopts computer PID control, which is intuitionistic and easy to operate, and the material temperature is accurate

7. The hydraulic system adopts multi-stage pressure independent control, linear control of speed and temperature, precise control of injection glue, opening and closing mode and other actions to make the production injection stable, and the appearance of the product is beautiful;

8. The closed mode and the injection adopt the closed-loop feedback position information of the grating ruler, and the position control is more precise;

9. The electrical appliance is equipped with safety protection device to maintain the safety of the operator; and the fault alarm information display makes the maintenance easier and convenient;

10. The computer adopts large-screen LCD design, intuitive and easy-to-operate human-machine interface, and is free to switch between Chinese, English, Russian and Korean four languages; it can store 60 sets of mold parameter memory, and the production adjustment is easy and efficient.

small Injection molding machine manufacturer, mini vertical injection molding machine, injection molding equipment

Changzhou Yuehai Zanyang Machinery Sales Co., Ltd. , https://www.zanyangmachine.com