1 Light with single-loop switch, group switch control 2 Light with single-loop dimming and group dimming control 3 Lights have control functions that change the overall scene combination 4 Light with programmable intelligent touch panel control 5 Light has no manual management logic function, timing control 6 Control system has emergency manual switch function 7 The control system has dry contact signal and analog signal access function, which can cooperate with human body induction, illumination induction and fire fighting system to perform linkage control 8 The control system adopts multi-functional programmable intelligent panel and touch screen control 9 The system can expand auxiliary control functions, such as curtains, air conditioning and other controls 10 The control system is a high-performance fieldbus intelligent lighting control system 11 System has Internet remote monitoring 12 The control system has open communication interfaces and protocols to facilitate linkage with total integration. Open protocols: Modbus, Opc, Lonworks, or others.
Deep groove ball bearing:
All bearings are essentially rolling devices that enable an object to move by reducing friction between that object and the surface it is moving over. The principle is that all objects taper Roller Bearing 1/8 inch 1 ball bearing are able to roll far better and faster than they slide.
Deep Groove Ball Bearings are suitable for high speed and even extremely high speed, and very durable, without constant maintenance.These bearing small friction coefficient, high limit speed, size range and variety in form, used in precision instrument, low noise motors, automobiles, motorcycles and general machinery and other industries, is the most widely used type of bearings in machinery industry.The main bearing is radial load, which can also bear a certain amount of axial load.
Deep Groove Ball Bearings Deep Groove Ball Bearings,Miniature Ball Bearings,Small Ball Bearings,Pillow Block Bearings ZHEJIANG XCC GROUP CO.,LTD. , https://www.xccbearing.com
The rapid development and mutual penetration of computer technology, communication technology, automatic control technology, bus technology, signal detection technology and microelectronics technology have made great progress in lighting control technology and lighting has entered the era of intelligent control. There are two main purposes for achieving the intelligence of the lighting control system: First, the level of control and management of the lighting system can be improved, and the maintenance cost of the lighting system can be reduced; second, energy can be saved and the operating cost of the lighting system can be reduced.
With the continuous change of lighting system applications, the application is gradually complex and colorful. The simple control of the switch can no longer complete the required control. Therefore, the lighting control should also be developed and changed to meet the practical application. need. In particular, the development of computer technology, computer network technology, various new bus technologies and automation technologies has greatly improved the lighting control technology.
Using intelligent lighting control, various information in the lighting system can be automatically collected according to conditions such as environmental changes, objective requirements, and user pre-determined requirements, and corresponding logic analysis, reasoning, judgment, and analysis results can be performed on the collected information. The required form of storage, display, transmission, and feedback control of the corresponding working status information, in order to achieve the desired control effect.
The purpose and significance of intelligent lighting system construction 1) Good energy saving effect brings considerable economic benefits 2) Prolongs the service life of lamps through soft-starting technology 3) Improves working and living environment, improves work efficiency, and improves the quality of life 4) Achieve multiple lighting Effect 5) Improve management efficiency Reduce maintenance costs ZFZM series intelligent lighting system features 1, remote control, centralized control 2, automatic timing control 3, scene function control 4, dimming control 5, linkage control 6, manual control of weak current switch 7, mobile Terminal control 8, powerful and extensible interface 9, function of integrated management system of the Internet of Things platform
System partition design The ZFZM intelligent lighting system adopts partitioned centralized management and control. The system is divided into multiple areas according to functions and physical locations. Each area is positioned according to its own function, and different function modules are configured. At the same time, according to the environment of the project itself, Functional characteristics, set the corresponding implementation effect, for example:
Office area: Through the main control module, the interface single lamp controller (with dimming interface electronic ballast) is operated and controlled. Combined with the illuminance sensor, according to the actual illumination of the room, the single lamp auto-dimming control of the lighting system maintains a constant indoor illuminance value. That is to meet the needs of indoor office light environment, but also to maximize energy savings. At the same time with the scene timing function, set a variety of work modes, the lighting system uses a one-button control, and automatic control.
Public areas: Lighting with time management and sensors serve as energy-saving effects with lights on and no lights off. And give visitors or employees a personalized lighting experience. (eg corridors, elevator halls, parking lots, etc.)
Welcome area: For some welcome important places (such as the hotel lobby), the choice of lamps is adequately complete. The control of the lighting system also needs to be perfect and user-friendly. Dimming control is essential. The lighting in the entire lobby is automatically managed by the system. The system automatically adjusts the lighting effects according to the operating hours of the lobby. The lobby reception area is equipped with a programmable control touch scene panel. According to various functional characteristics and different time periods of various regions, a variety of lighting scenes can be preset; at the same time, the staff can also be manually programmed, and can easily select or modify lighting scenes. . Such as setting, morning, noon, evening, work, holiday, leave and other scene modes, through the different arrangements of the various loops, the final realization, in the optimization of the number of lamps and lanterns at the same time to achieve the lighting environment, beautify and practical functions to maximize.
Dining area: Set a variety of dining modes to create a different atmosphere for creating a welcome scene: just press a button on the touch screen, joyful, joyful light colors, use lighting language to communicate with guests for the first time... Foyer The chandelier lights up 100%. The hallway lamp is 100% bright. At the channel, the light is 80% bright. Deep in the restaurant, the chandelier is turned off, and the spotlight is 70% bright. A progressive and progressive welcome atmosphere was formed. Western food scene: A button, the atmosphere of the audience is transformed into a romantic, soft light shade. According to the table spotlights 100% brightness, illuminate the desktop; according to the wall spotlights 80% brightness to enhance the restaurant's main profile; wall lamp, brightness 50%; chandelier brightness 40%; downlights off. Waiting for the scene: a button, the restaurant presents a solemn solemn atmosphere. Chandelier, 80% brightness, as the main light source; downlight 100% brightness, illuminate the channel, white light source shows cool colors; other lights off. Celebration scene: 40% brightness of the wall light, all other lights are extinguished. The stage lights are on and the music sounds...
system introduction: