Posted on

  • Model NO.: 120
  • Certification: CE, ISO, ISO9001: 2000, Ce, SGS
  • Customized: Customized
  • Transmission Method: Hydraulic Pressure
  • Suitable to Process: Color Steel Plate, Galvanized Board, Aluminum Plat
  • Warranty: 2year
  • Method: Roll Forming
  • Product: Tile
  • Automation: Automatic
  • Transport Package: Main Machine Is Nude
  • Origin: Cangzhou Hebei China
  • Tile Type: Colored Steel
  • Condition: New
  • Usage: Roof, Floor
  • Color: as You Desire
  • Width of The Plate: 1000mm
  • Type: Single Deck Roof Sheet Roll Forming Machine
  • Processing: Roll Forming
  • Brick Raw Material: Color Steel
  • Trademark: XDL
  • Specification: 10.8*1.3*1.5
  • HS Code: 84552210
Brief introduction:
  1. Packing Method
Main machine is nude, the computer control box is packed by carton box.
  1. Transportation
All machines need one 40 feet container to hold. If your company is not in China, We are in Tianjin port to delivery.
If you are located in China. Please tell me your shipping address, and select the mode of transportation.
  1. Payment Term
30% deposit by T/T in advance and 70% balance after inspection confirmation before shipment.
  1. Delivery Time
Within 40 days after receiving deposit.
  1. Warranty:
One year, and we will provide technical support for wholelife of the equipment.
Our company used the brand parts about Schneider or Delta Electronics and so on, According to the customer need to choose. Easy to global sourcing. Overall easy loading and unloading machine. Customers can according to the need for replacement parts. And our company provide global service.
After we receive the deposit, our designer will arrange the producing of the machine. After assembling, we will debug the machine and at the same time, we will make video for the clients and teach them how to operate the machine. Before shipping, the machine is tested in our factory. when the client gets the machine, he can according to our video to operate the machine. If some parts of machine broken within 1 year, we will give him the spare parts for free. If more than 1 year, maybe some spare parts need to be charged. If machine can not work well, we can teach them online until the machine is perfect.
If you need, we can go to your place to assist you. But you need to provide the cost of the engineer.
If you can provide better drawings, we can produce machine for you.
High Performance Shutter Door Roll Forming Machine
 
  1. Raw Materials Request
1. Suitable Material Colored Steel plate, Galvanized Board, Aluminum Plate
2. Coil width 175mm
3. Effective width 145mm
4. Thickness 0.3-1.0mm
  1. The Host Quality Requirements:
1. Color As you like
2. Appearance size
(About) 		6.0*1.3*1.5m
3. Rows of rollers 12 rows
4. Rolling material 45# steel,roller surfaces polishing, hard plating
5. Diameter of shaft ¢38mm
6. Service life 7 years
7. Total power 3.7 KW
8. Price (FOB) $8000
  1. Turn/Cut/Console Quality Requirements
1. Productivity 15-20m/min
2. Cut Mode Hydraulic forming after cutting off
3. Cutter material Cr12 Heat Treatment
4. Electronic control
system 		PLC, Touch Screen, Encoding counter
  1. Device Configuration
No   number
(1) Manual decoiler 1 set
(2) Guiding device 1 set
(3) Main roll forming machine 1 set
(4) Hydraulic cutting device 1 set
(5) PLC electric control system 1 set
(6) Hydraulic driving system 1 set
(7) Special tools and parts 1 set
  1. Equipment For Process Flow
Consist of Decoiler, Main roll forming machine, Cutting device, Hydraulic drive system, Electric control cabinet, ect.
  1. Flow Chart
 
  1. Detail Description
  1. Tension type decoiler
 
 		 Functional Configuration The worker put coil on the manual decoiler, and tensioning it through spanner.
technical parameters The maximum load capacity          5 Ton
The coil inside diameter           φ508mm
Suitable coil width               175mm
(2) Main machine system Roll forming system
 
  1. Roll forming system consists of machine frame, drive disk assembly and cold bending rollers, ect.
  2. The machine Section production and then splicing it
  3. Cr12 Heat Treatment,roller surfaces polishing, hard plating .
  4. Support structure in the form of roller shaft.
  5. All motors use dedicated motor, has excellent mechanical properties.
  6. Powered by a hydraulic motor system, it has small machine noise, and stable speed rapid prototyping.
System for forming after cutting off
 
  1. Adopting rolling forming then cut the sheet. No waste here, Cutting knife is made of the Cr12 after quenching.
  2. Using combined frame type to cut the machine frame. The characteristics is good maintainability and easy to adjust.
  3. Hydraulic stations offer the cutting power.
Structural features
 
  1. Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
  2. Cut-off tool: Use of high strength wear thicker type mold, it is advantageous to avoid cutting off at deformation.
  1. Hydraulic system
  1. Description
  1. The main valve parts adopt domestic high-quality brand.
  2. Oil cylinder and oil pump adopt national standard rod oil cylinder, easy to purchase all over the world.
  3. The motor is national standard copper core, universal around the world.
  1. Characteristic
  1. The hydraulic system after optimization design, compact structure, with beautiful appearance
  2. Stable performance and good durability.
  1. Electronic control system
  1. Description
  1. The machine used well-known brand of Delta PLC control technology. To realize the automatic machine
  2. The system to provide friendly man-machine interface, It can be set batch, workpiece length and number, etc.
  3. Encoder count, count and length with function.
  4. PLC touch screen adopt domestic famous brands.
  1. Characteristic
  1. Adopt touch screen control box through the man-machine interface, convenient operation, good appearance, consistent with the whole equipment.
  2. The main components adopt France Schneider, It will stable performance, good reputation, global procurement.
  3. Using a number of control technology, automation degree is high.
  4. Encoder count, length accurately.

High Performance Shutter Door Roll Forming Machine

Cangzhou Xindingli Cold Bending Machinery Co., Ltd
Contact person: Angela Lee
Contact me to get more information
Welcome to contact and visit us, waiting for your cooperation sincerely.

Metal stamping AMPLIFIERS Metal Chassis & Panel

Timeplex` customers rely on our expert design and development services for variety of components, ranging from micro-miniature parts to large, intricate components. We can provide prototyping services to facilitate high volume orders of up to 80 million parts.
Components we produce through our custom precision metal stamping include:

AMPLIFIERS metal chassis


• Electronic connectors
• Sensor components
• Thrust washers
• Surface mount pins
• Transfer stampings
• Heat sinks
• Printer cartridge blades
• Medical components
• Insert moldings
• Fuse clips
• Furniture parts
• And more.


More services we offer:

Besides of Metal Stamping Components, we also complete solution for OEM/ODM Products & components, offer services of deep drawing services, EMI metal shielding parts, heat sink ,plastic molding products for custom, Plastic Injection Components, Metal Stamping Parts, home appliances accessories ,R/C drone and smart electronic toys etc.

Our advanced equipments, professional engineers ,high quality system, enable us to provide high quality with low production cost Based on our strength, passion and capacity, we devote to supply one-stop service to customers.


Amplifiers Metal Panel



Amplifiers Metal Chassis Panel,Amplifiers Metal Stamping Panel,Amplifiers Metal Stamping Base,Amplifiers Metal Panel

Timeplex Industrial Limited , https://www.timeplexhks.com