After the "big snowfall", the temperature dropped abruptly, and all parts of the country began to enter the all-weather "frozen" mode. The "mist killer" group of fog and "invisible killer" dark ice quietly descended on various domestic highways. It is reported that Sichuan Chengmian line on December 7 occurred in a series of 53 vehicles rear-end crash, the culprit is the "mobile killer" regiment fog.
So, what should the car owner do when the high-speed traffic on a frozen road meets a dangerous road?
Fog section of the road slowly open to the light



The fog is commonly known as “fog and fog”, and it appears in areas such as valleys, rivers, and ponds, etc. It is difficult to predict and predict. Hukun, Hangrui, Jingkun, Jingangao, Shenhai, Xirong, Jingtai, Bao The Mao, Lanhai, and Jiguang Expressway sections are the 10 regular road sections in China, and the owners should choose to bypass as much as possible. If you encounter a cloud of fog on a high-speed road, you should slow down to avoid sudden stop emergency braking, and turn on fog lights, low beam lights, position lights, and front and rear lights to guide traffic.
Dark ice section of the road to avoid burning



High-speed route dark ice section, should try to keep a straight line running, playing the steering wheel, step on the brakes and step on the accelerator must be gentle, to avoid emergency braking, frequent lane changes, to prevent the vehicle from sliding. At the same time, the first car network to remind the owner, the dark ice section of the road to increase the driving distance, after the curve and the slope should be a smooth deceleration, to avoid mid-speed, street parking or stalling. In winter, take the dark road section of the high-speed route. If necessary, the owner can also install the anti-skid chain in advance.
High-speed driving safety on ice days, the owner in the end should pay attention to what?


Do not wipe the fog with high speed in winter Do not wipe the fog with your hand in winter. The temperature difference between the outside of the car in winter is very large. It is easy to produce fog on the window glass, block the sight of the traffic, and the speed of the high-speed road is very fast. A few seconds can lead to a car accident. You should abandon the adventurous practice of wiping the steering wheel with one hand. The first car network reminds the owner that it is best to let the air conditioning system work before using the high speed system. Use the car air conditioning system to adjust the temperature inside the car to avoid the fog generated by the front windshield and apply a layer of antifogging agent to the windshield.
In winter, high speed avoids road slippery speeding. Freezing days have a very slippery surface. The road surface is covered with a thin layer of ice. The vehicle is prone to tire slippage. Any rush to hit the brakes and rush the direction may cause the vehicle to slip out of control. . The first car network reminds owners that winter driving speed should be kept at a low speed, and the driving distance should be 2 to 3 times or more when the road is dry. The shifting, refueling, and braking are gentle, and the brakes are slow. Brake to control the vehicle, do not overtake on slippery roads.
During the winter, the strong wind and windproof windbreaker are often used in winter, and windy weather often occurs in winter. Vehicles driving on high-speed roads are prone to sideways winds, which may lead to deviations or body floats. This is especially true for vans and large buses that have a high overall center of gravity and lateral area. In larger box-shaped vehicles, owners should reduce the speed and hold the steering wheel in due course. The first car network reminds the owner that when the vehicle is moving at a high speed in winter, once the vehicle is found to be out of alignment, the steering wheel should be slightly turned to adjust the vehicle. Never use the steering wheel to avoid the high-speed vehicles rushing to the side railings.

Pile Drilling Rig

Photovoltaic Piling Rig also named Solar piling drill rigs is widely used in photovoltaic, foundation drilling, it is most advanced hydraulic drilling rig for solar drilling application. The rig can be operated in very flexible way.

The feed can be turned left and right in different angle to fit the variable application. The full coverage area for drilling is seriously considered to achieve extremely drilling position. For solar power station, Photovoltaic drilling, pile drilling and highway guardrail drilling as well as construction drilling is most suitable.


Besides piling drilling, it can do blasting hole drilling for mining.

It is fully hydraulic control solar piling machine, it can has highest drilling efficiency for operator, especially for time limited project. And the key components are from top end brand, such as Deutz AG diesel engine,Cummins engine, Yuchai diesel engine,Permco pump,Eton motor, Parker hoses and Rexroth pump. All these key components can make sure solar pile driving Machin has longest lifetime and least break down.

The Photovoltaic rig`s drilling model can be selected from impact hammer to rotary head for different geological structure.

Photovoltaic pile driver is not only for photovoltaic or soloar piling drilling, it also can work for water drilling and foundation drilling etc. multi-functional drilling work.

Solar pile driver has some unique design to has it to operate in every sharp slope area and in order to make operator a very vertical borehole in any position.

Yikyui PV pile driver has rotary boom with rotary platform. With this function, operator can drill in very accurate position with less moving of Pile drilling machine, which can save time and higher quality borehole.

Photovoltaic Piling Rig,Crawler Piling Equipment,Construction Reinforcement,Hydraulic Pile Driving Equipment

Henan YK Prospecting Machinery Co., Ltd , https://www.yydthdrillingrig.com