In the interplanting process of forage grasses, especially on the surface, the survival of forage grasses is often caused by improper seed germination or poor early seedling growth. One of the main methods to solve such problems is to granulate seeds. How to granulate In the past, there have been some research experiments. The particle counter plays an important role in the research experiment.

In the greenhouse of Hokkaido Agricultural University in Japan, we used Dactylis as a test species to study the amount of irrigation water: the effect of wrapping material on the early stage of the pregnancy and the capture of the Dungling Seeds, the weight of the coating agent, the weight of the clay, and the bark of the bark of the barium carbonate. , 3mm, 4mm three different irrigation areas. The result is:

1. Within the experimental area after the sowing days after planting, the plant ash was used as a coating agent, and the seed germination rate was much lower than that of the smoked soil area and the calcium carbonate area.
2. 12 days after sowing, plant growth rate was much slower in the specific clay area and calcium carbonate area in the plant ash area, while in the heavy clay area and calcium carbonate area, the plant growth was best in the 41 Rena and Tantan irrigated areas. After 30 days of seeding, it was still a heavy clay zone and calcium carbonate zone.
3. The particle counter counts the seeds of the grass, and the most paste of the seedlings and tongues that are swallowed and swallowed is the smoked sticky burdock area, followed by the low carbon scaler, the gray area, and the difference in each of the beryllium areas. In the above-ground parts of the smoked Pang and Phyllanthus arborescens plants, the amount of the wild pagoda plants was increased with the amount of irrigation water increasing. Out of kind, a turn of the effect of granulation. In contrast, turfgrass has inhibitory effects on the germination and initial growth of Dactylis glomerata seed, which is due to the reef-like nature of ash.

Scan the QR code below to watch the Top WeChat official WeChat (also WeChat search: top instrument), agricultural equipment information in real time view:

Electric wire rope hoist

Maximum Load:1000-100,1000kg

This novel VT type Electric Wire Rope Hoist is made with 13 patented technologies.

As contrasted with conventional designs, the VT type electric wire rope hoist is a revolutionary new generation product. It houses many brilliant brilliant attributes, such as a superb performance, short headroom, accurate positioning, great operating comfort, and maximum security and reliability, all encompassed in a compact design. It is a multi-functioning machine that has revolutionized the way the wire rope hoist is designed and manufactured.

With a hoisting capacity ranging from 800kg to 250,000kg,the lift can take the load up to a maximum height of 103.6m.Plenty of models, Configurations and specifications exist for the hoist, from which customers are sure to find the perfect match.

Advantages

Short headroom allows large vertical operating space for the wire rope hoist. Size-C hoist design leaves more vertical space for lifting. Such attribute can be hardly found in any of its contemporaries. The hoisting hook can reach much closer to the side walls. Minimum side clearance effectively enlarges the work area.

Dynadrive is designed for stable running and fast positioning. It can minimize the load sway and improve operating safety and comfort. Each component of our electric wire rope hoist is rigorously inspected and tested by our qualified engineers to ensure the safety and working efficiency the final product.

A high load factor 60% can be achieved of the motor, whose cooling performance is 30% higher than other similar products. High performance safety brake has a use life exceeding 1 million cycles. The brake can adjust itself according to the degree of wear. This design requires limited maintenance.

Large-diameter cable reel is designed for extended use life and small fleet angle. During lifting, the rope only deviates a little to the side of the drum, which ensures vertical lifting, accurate positioning, and maximum operating convenience.

Given customer needs for performance and ease of operation. ergonomic features are added to the electrical wire rope hoist to increase operating safety and comfort. Double-layer protective polypropylene coating of the pendant control station enables an IP65 rating.

Plenty of options exist, in order to accommodate various customer needs.

Non standard rail width

Special rail gauge

Radio remote control

Traveling limit switch

Derailment catches on double girder trolley

Phase protection relays

Hoist travel monitoring device

Sound and light alarm

Explosion proof and/or spark proof hoist

Load indication device

Motors thermal protection

Stainless steel hoist electrical cubicle:IP55 or IP65

Class H motors

Secondary brake

Variable speed lifting

CSA electric control

For any other special requirements, please contact us.

Electric Wire Rope Hoist

Electric Wire Rope Hoist,Electric Hoist For Crane,Proof Wire Rope Electric Hoist,Wire Rope Electric Hoist

Eurocrane (China) Co., Ltd. , https://www.eurocranegroup.com