According to the requirements of the latest national standard GB/T5507-2008 "Measurement of grain and oil inspection powder thickness," YFS30x8 new national standard powder screening screen independently developed and produced by Top Instrument has been launched. The principle is that the sample is sieved on screens of different specifications, the samples of different particles are separated from each other, and the thickness of the grain is calculated according to the residue amount on the sieve. The circular powder screening screen has many structural advantages. Specifically, the structure adopts a worm gear with a stable center of gravity and high precision as a variable speed transmission, and the eccentric linkage mechanism performs a plane rotation motion, and the tray integrally presses against the rod seat. The sieve is fixed more firmly. In addition, the circular powder screening adopts single-chip microcomputer control, electronic timer controlled by a single-chip microcomputer, high timing precision, easy operation, and can realize various functions such as time setting, working time, emergency stop and automatic zero reset. The technical indicators of the new standard powder screening are in full compliance with the requirements of the new GB/T5507-2008 national standard. They are the product quality inspection institutes of grain and oil, the quality and technical supervision bureaus, and grain processing plants that measure the fineness of powders. Essential testing equipment.
Compared with the square powder sieve, these two instruments have a few different technical parameters. The specific performance is as follows: The technical parameters of the circular powder screening are the maximum screening capacity: 200g; radius of gyration: 50mm; screen area: Φ300mm (diameter); screen height: 30mm; rotation speed: 260r/min; timing range: 0.01s-99 hours and 99 minutes adjustable; Motor power: 120W; Working voltage: AC220V; The technical parameters of the square powder screening is the maximum screening capacity: 200g; radius of gyration: 40mm; screen area: 233mmX233mm; screen height : 30mm; rotation speed: 200r/min; timing range: 0.01s-99 hours and 99 minutes adjustable; motor power: 120W; working voltage: AC220V.

Pallet Fork

Typically any forklift from 1500-5500 lbs. will have Class 2 forks. 6000-11,000 lbs capacity lifts will be Class 3. 11,500-17,500 lbs capacity forklifts will be Class 4. After that, most forklifts use a shaft mount or propriety mount.

4000-Pound Capacity Clamp-on Pallet Forks for Tractor/Loader, Skid Steer Bucket | Pair. Attachments

The pallet fork is a component of the lever escapement of a mechanical watch. The pallet forkand the lever form one component that sits between the escape wheel and the balance wheel.

Pallet Forks For Tractors. Moving pallets with your tractor is a task that makes sense for millions of tractor owners,

contact Sara- Genenal manager

email:forkliftfork@hotmail.com

phone/whatsapp/wechat:8613863419726

Pallet Fork,Shaft Forks,Cargo Fork,20 Ton Forklift Forks

Shandong Techence Forging Co.,Ltd , https://www.sdtechenceforging.com