Pulp Molding Stacker,Pulp Molded Stacker,Paper Molding Stacker
Huatao Group Limited , https://www.sjzpulpmolding.com
1) Insert two grounded probes in the grounding direction of the grounding body and insert them into the ground 20m to 40m away from the grounding body. The insertion depth is 400mm, as shown in the figure below.
2) Place the grounding resistance soil resistivity tester near the grounding body and perform wiring. The wiring method is as follows:
1 Connect the grounding body to the terminal "E1" (three-terminal meter) or to the short-circuited common terminal (four-terminal meter) with the shortest dedicated wire.
2 Use the longest dedicated wire to connect the measuring probe (current probe) with a distance of 40 m from the grounding body to the connection terminal “C1†of the measuring instrument.
3 Connect the measuring probe (potential probe) located at a distance of 20 m from the grounding body to the terminal “P1†of the measuring instrument with a dedicated wire of the remaining length.
3) After placing the meter horizontally, check whether the pointer of the galvanometer points to the center line, otherwise adjust the “Zero Adjuster†so that the pointer of the meter points to the center line.
4) Set the "multiplication scale" (or coarse adjustment knob) to the maximum multiple and slowly turn the generator handle (the pointer starts to shift) while rotating the "measuring dial" (or fine tuning) Knob) Point the galvanometer hand to the center line.
5) When the pointer of the galvanometer is close to balance (the pointer is close to the center line), rotate the handle faster to make the rotation speed reach 120r/min or more, and adjust the “measuring dial†to make the pointer point to the center line.
6) If the reading of the “measuring dial†is too small (less than 1), it is difficult to read accurately, indicating that the magnification scale is too large. At this time, you should set the “scale†to a smaller multiple and re-adjust the “measuring dial†so that the pointer points to the center line and read out the exact reading.
7) Calculate the measurement result, ie R = "Magnification Scale" reading × "Measurement Dial" reading.
Introducing the Pulp Molding Stacker, an innovative solution for efficient sorting and stacking of pulp molded products. This cutting-edge technology is designed to simplify the stacking process of pulp moldings, saving time and labor while maximizing productivity.
The pulp mold stacker is equipped with advanced features that make it easy to use and efficient. Its automated system is capable of stacking up to 500 words of English content, making it an ideal solution for businesses that need to organize and stack large amounts of content quickly and accurately.
This state-of-the-art machine is designed to handle various types of pulp molded products including pallets, containers and packaging materials. Its versatile design integrates seamlessly into different production lines, providing a flexible and adaptable solution for a variety of applications.
The pulp mold stacker features a user-friendly interface and intuitive controls that are simple to operate and require minimal operator training. Its precise stacking capabilities ensure products are stacked neatly and securely, reducing the risk of damage and improving overall product quality.
In addition to efficiency and reliability, pulp mold stackers are designed with safety in mind. It is equipped with advanced safety features to protect operators and prevent accidents, ensuring a safe working environment for all personnel.
Overall, the pulp molding stacker is a game-changing solution for businesses looking to optimize their pulp molding product stacking process. Its advanced technology, user-friendly design and safety features make it a valuable addition to any production facility, helping businesses increase efficiency, reduce labor costs and increase overall productivity. Experience the advantages of a pulp molding stacker and take your pulp molding product stacking to the next level.