Recently, Mercedes-Benz (China) Automobile Sales Co., Ltd. filed a recall plan with the AQSIQ and will recall the following vehicles:
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
Judge good or bad PVC Edge Banding For Cabinet,Pvc Edge Banding,Banding For Cabinet,T Shape Pvc Edge Banding For Kitchen Cabinet Henan Shunbang Chemical Industry CO.,Ltd , https://www.pvcresinchem.com
1. Since November 2, 2015, some S 500 4MATIC coupes and S 63 AMG 4MATIC (217 platform) cars imported for 2014-2016 are recalled (production date: April 25, 2014 to February 2015) 25th). For the vehicles within the scope of this recall, the installation of the left and right side belts of the front seats of the vehicles may be slightly different from the standard, which may affect the locking and tightening functions of the seat belts, posing a safety hazard.
2. Since November 13, 2015, some S 400 L HYBRID (222 platform) hybrid vehicles imported for 2013-2015 have been recalled (production date: February 25, 2013 to September 24, 2014). For vehicles within the scope of this recall, there may be errors in the software related to controlling the fuel system, which may cause the vehicle to stall and pose a safety hazard.
Mercedes-Benz (China) Automobile Sales Co., Ltd. will implement a voluntary recall of all vehicles involved, and carry out targeted free maintenance or software upgrades to eliminate hidden dangers. The inventory vehicle will be sold out after eliminating the hidden danger.
The Mercedes-Benz Authorized Service Center will notify the relevant customers of each model from the above date. Customers of related vehicles can also call the service hotline (service hours are Monday to Sunday, 24 hours a day) to learn more about the recall. The owner can also visit the AQSIQ website's import and export commodity inspection column (jyjgs.aqsiq.gov.cn), the AQSIQ Defective Product Management Center website ( ) and the WeChat public account (AQSIQDPAC). to know more information. In addition, you can also call the Quality Hotline of the Defective Product Management Center of the AQSIQ or the quality hotline of the local entry-exit inspection and quarantine institution: 12365 (switch No. 2), reflecting the problems in the implementation of the recall activities or submitting defects.
Â
1. Look at the hue and surface roughness of the edge banding strip. The color of the surface of a good edge banding strip is also very important. Whether the color is close to the customized product and is gorgeous. If the surface is very rough and there are pull marks, the quality is definitely not much better. This is the surface quality of the edge banding strip. It has nothing to do with the quality of the inner material of the edge banding, mainly the production process of the edge banding factory and the production technical skills of the employees. A good edge banding strip is: the surface must be smooth, no blistering or seldom bubbling, no drawing or few drawing, moderate gloss, not too shiny or too matte (unless there are special requirements).
2. Check the flatness of the surface and bottom of the edge banding and whether the thickness is uniform, otherwise it will cause the joint between the edge band and the board, the glue line is too eye-catching or the gap between the board and the edge band is too large, which will affect the overall beauty. Details determine success or failure, and often a small detail problem may bring an embarrassing situation where the overall effect is not good.
3. Whether the edge trimming is whitish, whether the surface of the bent edge strip is severely whitish, and whether the ground color of the trimming strip is close to the surface color of the board in question. PVC Edge Banding strips are mainly made of PVC and Calcium Carbonate plus additives. If the calcium carbonate content is too high, whitening of the edge banding and bending will occur, which proves that the quality of such products is not good.
4. Whether the strength is okay and whether there is elasticity. High strength means good wear resistance, and the corresponding quality is better. Too high strength also means increased processing difficulty. Low elasticity means low wear resistance and low aging resistance. In addition, according to actual production needs, manual trimming is generally required, and soft spots can be made appropriately, and the automatic edge banding machine can make hard points appropriately.
5. Whether the adhesive is applied evenly and whether it is easy to fall off during use.
6. Smell whether the PVC edge banding strips taste or not. Products produced with good quality raw materials generally have a small taste. If the taste is too large, it means that the quality of the raw materials used in production is relatively poor.