Common slurry pump failure:
  
(1) the pump does not turn;
  
(2) Insufficient pump flow;
  
(3) Packing leaks;
  
(4) pump vibration, noisy;
  
(5) Bearing fever;
  
(6) bearing life is short.
  
Action:
  
(1) The solidified hard-edged sediments in the volute can be removed by the blockage.
  
(2) If the impeller or the inlet and outlet pipes are obstructed, the impeller or pipe may be cleaned. Such as impeller wear serious, should be replaced. Such as packing leakage, should be pressed packing. In view of these failure reasons, Yantai Xinhai Mining Machinery adopts advanced technology to research and develop a variety of slurry pumps, wear-resistant anti-corrosion, high lift, large flow rate, etc. The high transmission height, the pipe loss resistance is too large, reducing the conveying height or reducing the resistance , Widely used in various fields.
  
(3) If the shaft and the tank with different materials, the main reason is the machining error, the installation is not correct. Care should be taken to check that the installation is correct after installation. Such as sealing water ring wear serious, need to replace the new water ring. Such as the sealed water pipe blocked, seal water can not enter the middle of the packing root wear fast, leading to leakage. To block the water pipes to clear, keep the seal water clean.
  
(4) There are five main reasons: ① uneven media density. When the pump is just started, the vibration of the pump will disappear. This condition does not need to be dealt with. Just before driving, pay attention to blowing the medium with high-pressure air; ② The installation of the pump Not level. Check the level of the pump body during installation and operation. ③ cavitation, so that the pump impeller imbalance. Should reduce the installation height, adjust the outlet valve, reduce the import resistance. ④ suction tube inlet uneven. Should improve the pump feed conditions, and strengthen the uniform intake stability. ⑤ pump bearing clearance. Bearing clearance over the General Assembly led to large pump vibration, running in the daily operation of the pump should always observe the situation and found that the pump shaft and motor shaft or bearing damage is not timely treatment.
  
(5) The main reason for the following 5:00: ① not open the cold water or cooling water tank clogging, cooling water should be opened or clear the cooling water feature. ② equipment lubrication is not good. Adjust the amount of lubricant according to the instructions. ③ lubricant is not clean, oil impurities. Should clean the bearings, for lubricating oil. ④ thrust bearing wrong direction. For the import pressure, adjust the thrust bearing direction. ⑤ bearing air outlet blockage, leading to the bearing box body of heat can not be discharged, so that equipment temperature. Air outlet should be cleaned.
  
(6) There are four main reasons: â‘  motor shaft and pump shaft asymmetry or not parallel. The motor shaft or pump shaft should be adjusted to replace the shaft if it deforms or bends. â‘¡ bearing assembly is unreasonable. Replace the bearing and shaft, or replace the bearing. â‘¢ pump friction or impeller out of balance. Should eliminate friction or replace the new impeller. â‘£ lubrication is not good. Excessive too little impurities will lead to bearing life is short, the bearings should be removed before use.

Cheese Shrink Bag

Tipack Shrink Bags are engineered with superior technology to protect your breathing and non-breathing cheese throughout distribution, while still demonstrating quality at retail. Our wide selection ensures the best fit for your product needs. Tipack is concerned and dedicated to the packaging of meat, seafood, cheese, fish, our bags can keep food from drying out, extends shelf life, improves mechanical stability Tipack offers a wide range of shrink films and shrink bags with expandable barrier and sealing properties for meat, fish and poultry. Clear, dyed or printed - efficient lamination solutions can be processed on all common flow packaging machines. They are also suitable for heating applications and frozen foods. So our Shrink Bag is perfect solutions for foods, meat packaging .

We can custom any size you want for large quantity, and also offer standard size for most customers. Here are the standard width, 165mm, 180mm, 190mm, 205mm, 225mm, 250mm, 275mm, 300mm, 325mm, 350mm, 375mm, 400mm, 425mm, 450mm, 475mm, 500mm. And the length also can be any size that you want. Thickness: 50-80um. Color: Clear, or match PMS for large quantity. Printing: We also offer printing service with flex Packaging Machine, the machine can print 10 color on each side at the same time. Tipack bags can maintain superior shrink performance by balancing high shrinkage with low shrink force.

- High shrinkage and excellent transparency to showcase cheese quality
- Optional colored shrink bags, we can customize any color bags.
Customer benefits
-Tipack Shrink Bags feature a multi-layer abrasion-resistant construction that protects your cheese throughout delivery. For cheeses that breathe, use the medium barrier option to let the CO2 escape.
-Tipack shrink bags offer increased puncture resistance for the most demanding production and distribution.
-Tipack Barrier Shrink Bags are designed for packaging large cheese blocks that require low oxygen content, high shrinkage and high clarity. This special formula provides the longest shelf life and protects non-retail blocks from mold and weight loss.
-Tipack shrink bags are 29% thinner than traditional bags and contain no chlorine, providing a more sustainable shrink bag option.
final consumer benefit
- Excellent product freshness
- Printing quality that improves shelf attractiveness
- High gloss and transparency, see the quality of the product inside

Tipack is a leading manufacturer of meat & food packaging with nearly 14-year experience in China. AS of leading manufacturer of PVDC higher barrier Shrink Film in China. Our plant is equipped with full range of co-extrusion, printing and bag converting machines. All production facilities and processes are FDA, BRC and HACCP/ISO certified to ensure the safety of food contact. We offer one stop service, High Barrier Shrink Bag/Film, EVOH Fruit Cup, EVOH/PP Sheet, PA/EVOH/PE Thermoforming Film, PA/PE Thermoforming Film, MAP/Plastic/VPS Tray, Permeable Shrink Bag/Film, High Barrier Lidding Film , Absorbent Meat Pads, Vacuum Machine. We have 3 factories in Suzhou, Wuxi, Chuzhou, will have forth factory in Chengdu soon.

Now email or call us, we will work with you to find a perfect solution for your projects.

Grilled Cheese Bags32

Cheese Shrink Bag,Cheese High Barrier Shrink Bags,Pvdc Shrink Bags For Cheese,Cheese Heat Shrink Bags

Tipack Group , https://www.tipackgroup.com