In order to ensure normal and continuous working of the centrifugal pump in gas-containing oil wells, and oil-gas separator is usually installed between the protector and the pump. Sedimentation separator or rotation separator may be used according to the different gas conditions of the oil well. For oil well with high gas content, double-section separator is used in order to ensure effective separation of free gas. Special construction designation separator can be used in high-sand wells and you will get a satisfying result.
Separator And Inducer Separator Magnetic Separators,Laboratory Flotation Machine,Wet Roll Magnetic Separator,Magnetic Separator Tianjin RongHeng Group LLC , https://www.ronghenggrouppump.com
Overview
This type single stage double suction split casing(case) centrifugal pump is the new generation of high performance single stage double suction centrifugal pump, mainly used for water plant, air conditioning, water recycling, heating systems, and high-rise building water supply, irrigation and drainage pumping stations, power plants, industrial water supply system, Fire systems, shipbuilding industry, and other places of fluid transmission is the full replacement of SH, S, SA, SLA, SAP type double suction pump.
Technological Advantages
1. Bearing spacing between both ends is short, pump running stable, low vibration noise, and can increases the speed of running properly, to adapt to a wider range of performance.
2. Inlet and outlet at the same line, so that the pipeline layout is simple and convenient, beautiful.
3. The rotation of the same rotor can be reversed, reducing the risk of damage caused by the water hammer.
4. Unique design of high temperature, use of intermediate support, thick body, sealed cooling, bearing lubrication, so that the pump can run up to 200 ºC occasions, especially for heating network requirements.
5. Pump can be vertical or horizontal installed according to using conditions, seal can be mechanical seal or packing seal.
Material of Flow Components
Pump casing made of gray cast iron, ductile iron or cast steel.
Impeller made of gray cast iron, silicon brass or stainless steel.
Spindle in stainless steel or high carbon steel.
Other materials can be used upon requirement.
Model Description
Example: XS250-480A-L-R (M. F)-J
XS - new type split casing pump
250 - pump outlet diameter (mm)
480 - impeller diameter (mm)
A - cutting impeller for the first time
L - Vertical installation (without the L means horizontal installation)
R - hot water
M - wear resistant type
F - corrosion resistant type
J - shaft seal is mechanical seal.
Specifications
1. Outlet: DN80~1000mm
2. Flow rate: 100m3/h~11600m3/h
3. Head: 10m~200m
4. Speed: 550RPM-2150RPM
5. Power: 30HP~2500HP
6. Solid passing: ≤80mg/L
7. Driven: Electric Motor or Diesel Engine
Â
Model NO.: XS
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump
Material: Cast Iron, Stainless Steel, Bronze
Assembly: Pipeline Pump
Trademark: SUOTO
Transport Package: Wooden Case
Origin: Shanghai, China
HS Code: 841301090
Horizontal Single Stage Double Suction Split Casing (Case) Pump, Centrifugal Pump, Water Pump, High Flow Pump, Volute Casing Pump, Fire Fighting Pump