Posted on

Model NO.: AK-CC5005
HS Code: 3402
Model NO.: AK-CC5005
HS Code: 3402
AUTOKEM ENGINE DEGREASER Dissolves grease and oil, fast and easy!
Heavy duty solvent based
Spray-on-and-hose-off treatment!
Ideal for car engines, outbaord motors, concrete, lawn movers, chain saws, motor bikes, machinery and more.

Features&Benefits:
- Non-chlorinated
- Fast acting & easy rinsing
- Removes grease, grime, oils, and dirt
- Superior degreasing ability

Product Description:
AK-CC5005 Engine Degreaser is a Heavy duty cleaner designed to cut through tough oil and grease build up on the exterior of engines. Excellent for auto and truck engines, lawn mowers, marine equipment and machinery. Solvent based formula as well as water based forumula for your choice.

Instructions
1. Engine must be turned off and cool to normal temperature before cleaning.
2. Cover distributor, electronic, components, carburetor and air intake systems, etc. in case of short circuit during cleaning.
3. Shake well before use, spray product onto the target surface. Wipe out over-spray immediately with a wet cloth.
4. Soak the surface deposits for about 5 minutes ( brush unusually heavy deposits ).
5. Wipe the surface deposits with cloth and then flush with water, start engine immediately and idle for 5 to 10 minutes to assure complete drying.
 
 Caution
1. Store in a dry and well ventilated area below 120°F(50°C).
2. Do not place can on hot surfaces or in direct sunlight which may cause burst violently and serious injury.
3. Keep can away from electrical current or connections such as battery terminals because burn may occur.
4. Do not puncture, crush or incinerate ( burn ) can.
5. Keet out of the reach of children.
  AUTOKEM ENGINE DEGREASER Dissolves grease and oil, fast and easy!
Heavy duty solvent based
Spray-on-and-hose-off treatment!
Ideal for car engines, outbaord motors, concrete, lawn movers, chain saws, motor bikes, machinery and more.

Features&Benefits:
- Non-chlorinated
- Fast acting & easy rinsing
- Removes grease, grime, oils, and dirt
- Superior degreasing ability

Product Description:
AK-CC5005 Engine Degreaser is a Heavy duty cleaner designed to cut through tough oil and grease build up on the exterior of engines. Excellent for auto and truck engines, lawn mowers, marine equipment and machinery. Solvent based formula as well as water based forumula for your choice.

Instructions
1. Engine must be turned off and cool to normal temperature before cleaning.
2. Cover distributor, electronic, components, carburetor and air intake systems, etc. in case of short circuit during cleaning.
3. Shake well before use, spray product onto the target surface. Wipe out over-spray immediately with a wet cloth.
4. Soak the surface deposits for about 5 minutes ( brush unusually heavy deposits ).
5. Wipe the surface deposits with cloth and then flush with water, start engine immediately and idle for 5 to 10 minutes to assure complete drying.
 
 Caution
1. Store in a dry and well ventilated area below 120°F(50°C).
2. Do not place can on hot surfaces or in direct sunlight which may cause burst violently and serious injury.
3. Keep can away from electrical current or connections such as battery terminals because burn may occur.
4. Do not puncture, crush or incinerate ( burn ) can.
5. Keet out of the reach of children.
 

40 Concrete Batching Plant is set to produce 40 cubic of concrete every hour. The 40 Concrete Batching Plant can be set up without particular equipment or site preparation within 7-10 days. The 40 concrete Batching Plant is designed to be used anywhere that transporting large volumes of concrete is not practical or economical. This plant`s low profile eliminates the need for a ramp when being loader fed, further reducing its overall site and environmental footprint.

40 Concrete Batching Plant

40 Concrete Batching Plant,40M³ Mobile Concrete Batching Plant,Mix Concrete Batching Plant,Mini Concrete Batching Plant

SHANDONG SHINE MACHINERY CO.,LTD , https://www.shinebatchplant.com