DSX Grain Filter Instrument Structure and Parameters DSX filter is developed according to the GB5494-85 “National Standard for Inspection of Impurities and Imperfect Grains of Food Oilâ€, and is used for the inspection of impurities and imperfect grains. It plays a very important role in the field of grain and oil testing. The DSX filter adopts a table structure, and the worm and worm rotate at a variable speed. The screen body is supported by the three-point plane and is rotated by an eccentric linkage mechanism. Due to this structure, the DSX filter has a compact and reasonable structure, stable operation, and performance. Stability, easy operation and other advantages, in the electronic control part using 89LE52 microcontroller to control the forward and reverse, the control of the positive and negative reversal time is high. DSX grain filter main parameters are as follows: 1. The largest sieve: 500g; 2. Screen frame level: 3 layers; 3. Screening amplitude: 100mm; 4. Rotational speed: 115 ± 5r/min; 5. Shun reverse time: 60±2%s/60±2%s; 6. Supporting screen outer diameter: 220mm; 7. Motor power: 60W; 8. Dimensions: 350mm×333mm×203mm; 9. Working power: AC220V 50Hz; Machine weight: 12kg. Agriculture is the foundation of the national industry. With agriculture as a guarantee, a series of other industries such as industry can be derived. The foundation of agriculture is breeding. Only good breeding can ensure the high yield and high yield of agriculture. DSX grain filter has been proved by practice and has been successfully applied to the screening of grain and oil as a necessary screening and grading equipment for agricultural breeding.
A carbon steel plate has usually been considered as the steel that does not contain much alloy steel elements, also named as mild steel. Generally, elements are C, Mn, P, S, Si, besides these, there are no minimum limits for elements of Al, Cr, Ni, Mo, V, etc.
Carbon steel plates are available in different grades depending on the carbon content and strength.
As the content of Carbon increase, the steel plate hardness increases.
Low carbon steel plate: For carbon content 0.06% to 0.25%, also we call it mild steel plate.
Medium carbon steel plate: C content from 0.25% to 0.55%.
High carbon steel plate: 0.55% to 1.0%, also called hard steel plate.
Low carbon steel is the most common form, and it's very malleable and ductile. Medium carbon steel balances ductility as well as strength for excellent wear resistance. High carbon steel is exceptionally strong, while ultra-high carbon steel can be tempered to even greater hardness but no malleability.
As the percentage of carbon gets larger, steel can become harder and stronger through heat-treating. Carbon steel is usually heated to change the mechanical properties of steel, usually ductility, hardness, strength, and resistance of impact. Increasing the carbon content of carbon steel makes it harder and stronger, but reduces the steel`s ability to be welded, making it more brittle.
Carbon steel plate is most often used for structural purposes such as buildings, yet it has the flexibility to be worked into ornate designs. Low carbon steel sheet (wrought iron) is typically used for fences, chain links, gates, and railings. Structural steel (medium carbon steel) is used in cars, refrigerators, washing machines, buildings, and bridges. The steel sheets are normally made up of medium carbon steel.
Boiler Steel Plate,Carbon Steel Plate,Mild Steel Plate,Hot Rolled Steel Plate,Wear Resistant Plate Shandong Guanzhou Iron and Steel Group Co., Ltd , https://www.cnshansteel.com