Posted on

Model NO.: Dual Level Machine
Material: PPGI,PPGL,Pre-Painted Steel Sheet
Roller Material: 45#Steel with Chrome Treatment
Thickness: 0.3-0.7mm
Yield Stress: 235-350 MPa
Max.Forming Speed: 20 M/Min for Trapezoidal,5m/Min for Tile
Total Motor Power: 10.5 Kw
Total Weight: 12 Tons
Warranty: 12 Month
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Trademark: WILLING INT′L
Transport Package: Sea Worthy Fixed by Wire Rope, Wooden Blocks
Specification: CE Standard, ISO 9001-2008
Origin: China R. P
HS Code: 84552210
Double Layer Invert Box Roof Wall Panel Roll Forming Machine
 
Components for the Machine:
The roll forming machine consists of 5-ton manual uncoiler, infeed guide, fixed position driven forming stations, cutting equipment, hydraulic station, PLC control console, pre-cutter, safety cover, and manual unload product run out table.

Technical Parameters
 
Material galvanized steel, pre-painted steel, and aluminum.
Thickness From 0.3 mm to 0.7mm.
Main Motor Power 7.5 kw.
Hydraulic Power 3 kw.
Feeding Width 1000/1200mm.
Cover Width 835/1002mm and 800/1000mm.
Yield Stress 235Mpa (33KSI) ~ 350Mpa (50KSI).
Total Speed 20 m/minute for trapezoidal profile; 5m/minute for tile profile.
Cutting Tolerance +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm
Manual Uncoiler capacity is 5 tons.
Coil Inner Diameter 508mm or 610mm.
Voltage 380V, 3 phase, 50 HZ, or customized.
Numbers of Station 17~18 stations.
Type of Cutting roll-formed and length-set profile cutting.
 
2.     Material of Main Equipment:
Roller Material High grade S45C forged steel, coated with hard chrome.
Active Shaft Material High grade S45C carbon wrought steel, diameter 80mm.
Electric Elements PLC control console, touch screen and transducer,
from Siemens, Germany. It has data storage function.
Other electrical parts, from Schneider Electric, Germany.
Cutter Blades Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.
 
Process Sketch
Uncoiling the sheet -Pre-cut -Material feeding ðRoll forming - Measure the length -Cutting the panel -Panels running out to the supporter (optional: automatic stacker)

Packaging & Shipping

1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film; 
3.Spare parts and some small parts packed in plastic tooling box; 
4.All Components Fixed by steel wire with Container.

FAQ
Q:Are you a manufacturer?
A:Yes absolutely. Welcome a lot for your visiting to us.
Q:What's the delivery time?
A:Normaly will take 60days
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician. 
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.
Q:What's your strength comparing to the other supplier?
A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.

Chemicals For Cement & Concrete

We mainly produce EO and PO derivatives which can be used in cement additives, Concrete Admixtures. Important raw material for cement grinding aids and strength improvement agent, improve the Dispersion, reduce the the energy consumption of electric, save time and reduce the wear and tear of the machines. It can not only improve the early strength of cement, but also improve the late strength of cement.Our products for cement additives and concrete admixtures have been approved by so many International Multi-National Corporations such as SIKA, MAPEI, FOSROC, JIDONG, ect

Chemicals For Cement & Concrete,Chemicals For Cement,Raw Materials For Grinding Aids,Improve Cement Strength

NINGBO LUCKY CHEMICAL INDUSTRY CO. LTD , https://www.luckychemical.com