China Vertical Long Shaft Spindle Turbine Pump, Submerged Chemical Water Centrifugal Pump, Submerged Sump Pit Slurry Pump, Semi-Submersible Pump

1. Flow rate:Q=9~460 (m³/h)
2. Total head:H=10~65 (m)
3. Pump speed:n=1450rpm
4. Fluid s.g.:γ ≤1.5 
5. Fluid temperature:T=0~80ºC 
6. Pump diameter:50~200mm

1. A new type vertical submerged centrifugal chemical pump conforms to standard JB/T8096-1998.
2. Double bearing supporting to improve the reliability and stability of operation.
3. Optimized hydraulic model to better adapt different applications.
4. Several standard immersed depths of pump.A suction pipe can be added onto pump inlet flange when the pump immersed depth is longer than 1.5 m.
5. Adopting low linear speed design for heavy slurry to extend pump life.
6. Different anti-abrasive materials for various applications.

1. Single casing structure,pump casing is connected to the supporting tube,supporting tube is connected to bearing housing,bearing housing is connected to baseplate.
2. Cylinder type bearing housing plus rolling bearings.
3. Sealing ring as the shaft sealing,without any cooling water.
4. A stir impeller is adopted beyond the impeller of ZLJ model to agitate slurry or particles in the fluids.
5. Direct coupled Transmission.

1. Sewage water conveying for industries of electric power,mining,cement,metallurgy and non-ferrous metals
2. Fluid conveying for aluminum oxide process.
3. Other slurry conveying of settling pond.

1. Flow rate:Q=9~460 (m³/h)
2. Total head:H=10~65 (m)
3. Pump speed:n=1450rpm
4. Fluid s.g.:γ ≤1.5 
5. Fluid temperature:T=0~80ºC 
6. Pump diameter:50~200mm

1. A new type vertical submerged centrifugal chemical pump conforms to standard JB/T8096-1998.
2. Double bearing supporting to improve the reliability and stability of operation.
3. Optimized hydraulic model to better adapt different applications.
4. Several standard immersed depths of pump.A suction pipe can be added onto pump inlet flange when the pump immersed depth is longer than 1.5 m.
5. Adopting low linear speed design for heavy slurry to extend pump life.
6. Different anti-abrasive materials for various applications.

1. Single casing structure,pump casing is connected to the supporting tube,supporting tube is connected to bearing housing,bearing housing is connected to baseplate.
2. Cylinder type bearing housing plus rolling bearings.
3. Sealing ring as the shaft sealing,without any cooling water.
4. A stir impeller is adopted beyond the impeller of ZLJ model to agitate slurry or particles in the fluids.
5. Direct coupled Transmission.

1. Sewage water conveying for industries of electric power,mining,cement,metallurgy and non-ferrous metals
2. Fluid conveying for aluminum oxide process.
3. Other slurry conveying of settling pond.

Motor End Cover

The die casting process involves the use of a furnace, metal, die casting machine, and die.

The metal, typically a non-ferrous alloy such as aluminium or zinc, is melted in the furnace and then injected into the dies in the die casting machine. After the molten metal is injected into the dies, it rapidly cools and solidifies into the final part, called the casting parts.

The castings that are created in this process can vary greatly in size and weight, ranging from a couple of ounces to 100 pounds. One common application of die-cast parts are housings - thin-walled enclosures, often requiring many ribs and bosses on the interior.

Metal housings for a variety of appliances and equipment are often die cast.

Several automobile components are also manufactured using die casting, including pistons, cylinder heads, and engine blocks. Most home appliances also need lightweight and firm aluminum die casting parts, like bracket, heat dissipation module or structural support. Other common die cast parts include propellers, gears, bushings, pumps, and valves.

Motor End Cover,Washing Motor End Cover,Aluminum Engine Cover,Washing Machine Motor Cover

Ningbo Sunlee Electrical Technology Co. , Ltd. , https://www.nbsunlee.com