The new slag truck can be equipped with a GPS positioning system, and it can be driven according to the specified time and route, fixed-point loading and dissipating, designed for urban working conditions, installed environmental protection cover, no leakage, no dust, the vehicle has light weight, high transportation efficiency, Low procurement costs. With all the features of a dirt truck, there are five advantages compared to a typical dirt truck: The first is a better seal. The rear door and the lock hook can be equipped with hydraulic opening and locking structure, and the inner double rubber rubber seal is used for better sealing effect; the top cover can be equipped with a sealed top cover, and the cylinder pressure structure (patented technology) can be used for multiplexing. Sealed, can be used for mud, sewage and other liquid dirt and sand with a large amount of moisture transport, can effectively guarantee the transport process without leakage phenomenon. The second is more convenient operation. Can be installed two sets of flashlight dual control system, in the cab and the outside (carriage frame front) can control the car lift, roof and back door opening, closing, suitable for different working conditions of the operating environment. The third is higher intensity. The carriages are made of high-strength wear-resistant steel plates. The unique rolling forming technology is applied to the car body structure. The bearing surface is larger, the cargo compartment has stronger impact resistance and the service life is longer. The fourth is better stability. It can be selected from the domestic first cargo box without side beam structure, the center of gravity of the carriage is 90-140mm lower than similar models, and the stability during driving and operation is better. Fifth, the operating efficiency is higher. The top cover is equipped with a patented aluminum folding structure, which is light-weight, high-strength, easy to maintain, and has a smaller shrinkage volume than tarpaulin structures; it is driven by a hydraulic motor and opens faster. (This article comes from China National Heavy Duty Truck) 1. Welding Machines - A welding machine is an essential tool for any welding job. It is used to create a welding arc that melts the metal being joined, allowing it to fuse together. Welding Products,Slip Roller,Galvanized Roofing Sheets,Coating Sheet Metal Suzhou Gold ant Precision Sheet Metal Co.,Ltd , https://www.jmycutting.com
2. Welding Electrodes - Welding electrodes are metal rods that are used to conduct electricity and create an arc. They are coated with a flux that helps to protect the weld from contamination and oxidation.
3. Welding Wire - Welding wire is used in the MIG welding process to feed the welding arc with a continuous supply of wire. It is available in different thicknesses and materials, such as stainless steel, aluminum, and mild steel.
4. Welding Helmets - Welding helmets are designed to protect the welder's eyes and face from the intense light and heat produced during welding. They come in different styles and designs, including auto-darkening helmets that automatically adjust to the brightness of the welding arc.
5. Welding Gloves - Welding gloves are used to protect the welder's hands from heat, sparks, and other hazards associated with welding. They are made from materials such as leather and Kevlar and come in different sizes and styles.
6. Welding Safety Glasses - Welding safety glasses are designed to protect the welder's eyes from the intense light and UV radiation produced during welding. They are available in different shades and styles.
7. Welding Filler Metals - Welding filler metals are used to add material to the weld joint to create a strong, durable bond. They come in different materials, such as stainless steel, aluminum, and bronze.
8. Welding Clamps - Welding clamps are used to hold the metal being welded in place during the welding process. They come in different sizes and styles, including C-clamps, locking pliers, and magnetic clamps.
9. Welding Flux - Welding flux is used to protect the weld from contamination and oxidation during the welding process. It is available in different types, including powder, paste, and liquid.
10. Welding Gas - Welding gas is used in the TIG and MIG welding processes to shield the welding arc from contamination and oxidation. It is available in different types, including argon, helium, and carbon dioxide.
Recently, Sinotruk Huawei Co., Ltd. built a new type of intelligent slag truck for Zhejiang market to land in Zhejiang.
Related news: China National Heavy Duty Truck Warwick Waste Truck