Semi-Continuous Waste Tyre Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.
Flowchat of Batch Waste Tyre Pyrolysis Plant
Advantages of Batch Waste Tyre Pyrolysis Plant
1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.
2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.
3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.
4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.
5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.
6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.
7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.
8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.
Technical Parameter of Batch Waste Tyre Pyrolysis Plant
NO.
ITEM
PROJECT
1
Equipment Model
XY-7
XY-8
2
Door Model
Full Open Door
Full Open Door
3
Suitable Raw Materials
Rubber/Plastic Products
Rubber/Plastic Products
4
Structure
Horizontal Type Revolves
Horizontal Type Revolves
5
Reactor Size
Φ2200*6000mm Φ2600*6600mm
Φ2200*6000mm Φ2600*6600mm
6
Capacity for One Batch
5-6Mt; 8-10Mt
5-6Mt; 8-10Mt
7
Oil Yield of Tires
40%-45%
40%-45%
8
Work Pressure
Normal Pressure
Normal Pressure
9
Reactor Rotation Speed
0.4R/M
0.4R/M
10
Fuels Choice
Coal, Wood
Coal, Wood, Gas, Oil
11
Power
18KW/H
18-25KW/H
12
Cooling Method
Water Cycling
Water Cycling
13
Type of Drive
External Annular Gear
External Annular Gear
14
Heating Method
Direct
Direct
15
Type of Installation
With Foundation
With Foundation/Integrated Base
16
Noise dB(A)
≦85
≦85
17
Operation Mode
Intermittent Operation
Intermittent Operation
18
Total Weight(MT)
25-40
25-40
19
Installation Space Required
30m*10m
30m*10m
20
Manpower
3~4/batch
3~4/batch
21
Shipment
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Semi-continuous Waste Tyre Pyrolysis Plant Semi-Continuous Waste Tyre Pyrolysis Plant,Newest Semicontinuous Used Tyre Pyrolysis Plant,Semi-Continuous Rubber Pyrolysis Plant,Practical Semi-Continuous Waste Tyre Pyrolysis Plant Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com
Specifications
1. Material: Aluminum Alloy
2. Nominal diameter: 4"
3. Open method: Pneumatic
4. Working pressure: 0.6 Mpa
1. Bottom Valve
Emergency Shut Valve is installed on the bottom of the tanker, the top parts is tightly sealed inside the tanker. External shear groove design limits product spillage when the tanker is crashed down, it will automatically cut off itself via this groove under the situation there's no affectation on the sealing. This will efficiently protect the over rolled tanker from leakage to ensure the safety when transportation. This product is suitable for water, diesel, gasoline and kerosene and other light fuel, ect.
2. Benefit & feature
* Pressure-Balanced Type
When the valve is closed, the fuel pressure cannot push open the valve.
* Special Surface Treatment
The whole valve body is passed a special surface process to improve the anti-corrosion.
* Hydrodynamic Body
Design and high lift poppet minimizes pressure drop to give maximum flow rate.
* External Shear Groove
Meets the standard requirements to limit product spillage in the event of an accident.
* Manual Opening Device
When need to emergency discharging, the pneumatic control is useless, it can be opened by manual way.
* Easy-Installment
The size of the valve is more smart, is suitable for the smaller space's demand.
* Easy Servicing
Allows the air cylinder piston to be replaced without removing the valve from the tank pipe work.
3. Installment  Drawing
Â
Specifications
1. Material: Aluminum Alloy
2. Nominal diameter: 4"
3. Open method: Pneumatic
4. Working pressure: 0.6 Mpa
1. Bottom Valve
Emergency Shut Valve is installed on the bottom of the tanker, the top parts is tightly sealed inside the tanker. External shear groove design limits product spillage when the tanker is crashed down, it will automatically cut off itself via this groove under the situation there's no affectation on the sealing. This will efficiently protect the over rolled tanker from leakage to ensure the safety when transportation. This product is suitable for water, diesel, gasoline and kerosene and other light fuel, ect.
2. Benefit & feature
* Pressure-Balanced Type
When the valve is closed, the fuel pressure cannot push open the valve.
* Special Surface Treatment
The whole valve body is passed a special surface process to improve the anti-corrosion.
* Hydrodynamic Body
Design and high lift poppet minimizes pressure drop to give maximum flow rate.
* External Shear Groove
Meets the standard requirements to limit product spillage in the event of an accident.
* Manual Opening Device
When need to emergency discharging, the pneumatic control is useless, it can be opened by manual way.
* Easy-Installment
The size of the valve is more smart, is suitable for the smaller space's demand.
* Easy Servicing
Allows the air cylinder piston to be replaced without removing the valve from the tank pipe work.
3. Installment  Drawing
Â
Model NO.: C804TPQ-100
Material: Alloy
Type: Self-Operated
Structure: Shutoff
Pressure: 0.6 MPa
Nominal Diameter: 4"
Working Pressure: 0.6MPa
Trademark: JIALONG
Transport Package: Size: 50*48*39 Two Sets/CTN Gw: 24kg/Box
Specification: API, CE, SGS, PEI, ISO
Origin: Wenzhou, Zhengjiang, P. R. C
Model NO.: C804TPQ-100
Material: Alloy
Type: Self-Operated
Structure: Shutoff
Pressure: 0.6 MPa
Nominal Diameter: 4"
Working Pressure: 0.6MPa
Trademark: JIALONG
Transport Package: Size: 50*48*39 Two Sets/CTN Gw: 24kg/Box
Specification: API, CE, SGS, PEI, ISO
Origin: Wenzhou, Zhengjiang, P. R. C