Posted on

Model NO.: JQ-1010
Rated Torque: 6-18.5n.M
Material: Aluminium Alloy
Coil Material: Copper Wire
The Power Properties: DC
Export Markets: Global
Trademark: JQ
Transport Package: Foam + Carton
Specification: CE, ROSE, CCC, ISO9000
Origin: Jiangsu Province Changzhou City
Model NO.: JQ-1010
Rated Torque: 6-18.5n.M
Material: Aluminium Alloy
Coil Material: Copper Wire
The Power Properties: DC
Export Markets: Global
Trademark: JQ
Transport Package: Foam + Carton
Specification: CE, ROSE, CCC, ISO9000
Origin: Jiangsu Province Changzhou City
1000W Bike Part BLDC Hub Motor for Electric Motorcycle

1000W Bike Part BLDC Hub Motor for Electric Motorcycle


1000W Bike Part BLDC Hub Motor for Electric Motorcycle
1000W Bike Part BLDC Hub Motor for Electric Motorcycle
Wheel Size 14 (Depend on Your Demand)
Rated Speed(rpm) 630±10
Weight (Kg) 7.0
Rated Power(W) 1000W/2000W
Rated Efficiency (%) ≥80
Cable Location Shaft center right
Hall Sensor Optional
Surface Black / Silver
Brake Type Disc Brake
Rated Voltage(V) 72/96
Rated Current 1.4A
Material Aluminium alloy (Depending on Your Demand)
Certificates CCC,CE,ISO9001,UL



Our 1000W Bike Part BLDC Hub Motor for Electric Motorcycle characteristics

-Low noise

-Electricity saving

-High torque

-High strength

-High safety coefficient, high efficiency

-Long service life

-Not easy to be hot

-Big power

The hub motor is steadily emerging as the standard drive method for not just ebikes, but scooters, solar cars, and many other light electric vehicles. With a hub motor conversion, there is no need for external mounting brackets and drive chains to support a motor and transmission. Instead all of this is contained inside the wheel which mounts on your bike like any other wheel.

The direct drive hub motor is about as simple as things get. Imagine taking an electric motor, but holding the axle and letting the body of the motor spin. Now lace a bicycle rim onto this spinning motor body and there you have it, no moving parts other than the wheel itself.

Typically these are radial-flux Brushless DC (BLDC) machines that have an array of permanent magnets on the inside surface of the hub. The stator windings are attached to the axle, and the hub is made to rotate by alternating currents through these windings. In a DC hub motor, the magnets are on the axle, and the windings are actually spinning on the inside of the hub. A carbon brush transmits electricity to the spinning windings via a commutator plate.
 


Q: Before place an order, how can I choose?
A: Please specify the wheel diameter size, width, voltage, power and no-load speed of    
     the required wheel motor.
 
Q: Could I take samples to test quality and market in advance?
A: Yes, welcome to take samples to test our quality and service.
 
Q: What's the total cost for samples?
A: Total sample cost= sample cost + freight. We will give u the best shipping cost after    
     knowing the wheel size, battery needed or not.
 
Q: How do you ship samples?
A: Considering sample quantity is not big, we support ship samples by EMS, TNT or
     FedEx, fast and less damages.
 
Q: What's your minimum order quantity?
A: 100sets, one or two samples are ok.
 
Q: Could I use my own forwarder?
A: Yes
 
Q: I am new to international business, could you find an experienced forwarder to
     organize shipment for us?
A: Yes, we will assist and guild you to work out the shipping and import process.
 
Q: Is the sample same with formal orders?
A: Yes, sample's specification, performance, quality are totally same with formal orders.
 
Q: What's your delivery time?
A: For samples: within 7days; for orders: within 15days.

Contact Us
Iris Shao

Changzhou Jiqing Electrical and Mechanical Co., Ltd.

Website: www.jiqingmotor.com

               www.jiqingcn.com

 

Cell-Phone: (86) 15295182013

Office: (86) 0519-83127250

 

Whats: 86-15295182013
1000W Bike Part BLDC Hub Motor for Electric Motorcycle

1000W Bike Part BLDC Hub Motor for Electric Motorcycle


1000W Bike Part BLDC Hub Motor for Electric Motorcycle
1000W Bike Part BLDC Hub Motor for Electric Motorcycle
Wheel Size 14 (Depend on Your Demand)
Rated Speed(rpm) 630±10
Weight (Kg) 7.0
Rated Power(W) 1000W/2000W
Rated Efficiency (%) ≥80
Cable Location Shaft center right
Hall Sensor Optional
Surface Black / Silver
Brake Type Disc Brake
Rated Voltage(V) 72/96
Rated Current 1.4A
Material Aluminium alloy (Depending on Your Demand)
Certificates CCC,CE,ISO9001,UL



Our 1000W Bike Part BLDC Hub Motor for Electric Motorcycle characteristics

-Low noise

-Electricity saving

-High torque

-High strength

-High safety coefficient, high efficiency

-Long service life

-Not easy to be hot

-Big power

The hub motor is steadily emerging as the standard drive method for not just ebikes, but scooters, solar cars, and many other light electric vehicles. With a hub motor conversion, there is no need for external mounting brackets and drive chains to support a motor and transmission. Instead all of this is contained inside the wheel which mounts on your bike like any other wheel.

The direct drive hub motor is about as simple as things get. Imagine taking an electric motor, but holding the axle and letting the body of the motor spin. Now lace a bicycle rim onto this spinning motor body and there you have it, no moving parts other than the wheel itself.

Typically these are radial-flux Brushless DC (BLDC) machines that have an array of permanent magnets on the inside surface of the hub. The stator windings are attached to the axle, and the hub is made to rotate by alternating currents through these windings. In a DC hub motor, the magnets are on the axle, and the windings are actually spinning on the inside of the hub. A carbon brush transmits electricity to the spinning windings via a commutator plate.
 


Q: Before place an order, how can I choose?
A: Please specify the wheel diameter size, width, voltage, power and no-load speed of    
     the required wheel motor.
 
Q: Could I take samples to test quality and market in advance?
A: Yes, welcome to take samples to test our quality and service.
 
Q: What's the total cost for samples?
A: Total sample cost= sample cost + freight. We will give u the best shipping cost after    
     knowing the wheel size, battery needed or not.
 
Q: How do you ship samples?
A: Considering sample quantity is not big, we support ship samples by EMS, TNT or
     FedEx, fast and less damages.
 
Q: What's your minimum order quantity?
A: 100sets, one or two samples are ok.
 
Q: Could I use my own forwarder?
A: Yes
 
Q: I am new to international business, could you find an experienced forwarder to
     organize shipment for us?
A: Yes, we will assist and guild you to work out the shipping and import process.
 
Q: Is the sample same with formal orders?
A: Yes, sample's specification, performance, quality are totally same with formal orders.
 
Q: What's your delivery time?
A: For samples: within 7days; for orders: within 15days.

Contact Us
Iris Shao

Changzhou Jiqing Electrical and Mechanical Co., Ltd.

Website: www.jiqingmotor.com

               www.jiqingcn.com

 

Cell-Phone: (86) 15295182013

Office: (86) 0519-83127250

 

Whats: 86-15295182013

Socket Welder

PPR sockets must be manufactured and designed to be compatible with all PPR piping systems. How do you do fusion PPR? It will be pointed to one fusion welder named ppr socket welder. PPR socket fusion welding is a widely used technique for assembling plastics piping systems using injection moulded fittings. Socket welder is mainly for ppr/hdpe pipe and fittings butt-fusion. This socket fusion tool set contains everything required to perform fusion jointing on site. Suitable for all commonly used plastics and featuring a long service life, This PPR socket fusion welding machine guarantees extremely accurate temperature control for strong, consistent joints. PPR pipe welding Machine are all the major part are made of high-quality materials, simples operation, convenient and practical, its ideal for pipeline construction equipment. Wuxi Yuda produces RDS32/20, RDS63/20, RDS110/75 and RDS160/63 portable ppr/hdpe pipe socket fusion welder, also RDS-T160 manual socket fusion machines. Installing PP-R Products using Socket Fusion: Step 1 – Match Pipe and Valve Size, Cut Pipe Step 2 – Inspect the Cut Step 3 – Measure Pipe Insertion Depth Step 4 – Prepare Welding Iron Step 5 – Heat Outside of Pipe and Inside of Fitting Step 6 – Insert Pipe in Fitting Step 7 – Allow Welded Connection to Cool Step 8 – Verify Connection

Socket Welder,Socket Fusion Welding,Socket Welding Machine,Socket Fusion Welding Machine

WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.pipefusionwelding.com